For forestry tires, Nokian Tyres have the best and most complete range of tires and they are the global market leader in forestry tires. They have tires for both cut to length and full tree forestry work.
They have a range of tires that can operate with our without tracks and chains, with excellent traction and durability for trouble free service life even in the most rugged conditions.
So regardless if you are looking for skidder tires for your full tree forestry or skidder tires and harvester tires for your cut to length forestry, Nokian Tyres have some of the best tires that you can find.
They have both radial and bias tires for forestry machines, so the choices are plenty and there are enough to ensure that you get the best tires for the machines you have and for the working conditions that you will face.
These tires can handle the harshest conditions and can handle mud, bogs, sharp rocks and even winter conditions, so that you don’t have to worry about the weather conditions.
They are also extremely puncture resistant so that sharp stumps or rocks will not harm them. They also have self cleaning tread so that the traction will be intact despite mud and snow is present.
Deep in the forest is not a place where you want to have problems related to the tires, as they can be very costly and cause long downtime. For high productivity you will need to avoid all problems and have tires that can provide long trouble free service life in all conditions.
Low rolling resistance also gives the tires low fuel consumption and a better environmental impact.
There is currently only one radial forest tire available for
cut to length (CTL) forestry and that is the Nokian Forest Rider, which can be
used on all CTL machines that has the same dimension of tires in case you want
These tires will improve the grip on your forwarder or harvester as you work through hard conditions. If you need new forwarder or harvester tires, make sure to consider these.
They have some of the best driving comfort of any forestry tires as you drive through rough terrain with stumps
and rocks. These tires enable you to drive and work at higher speed, which can
They exhibit a very wide contact area, which makes gives it
a lower surface pressure than a conventional bias tire. This is beneficial both
from the point of view that the impact on the terrain is reduced causing less
stress and then it improves your driving properties as you don’t sink when you
drive over soft surfaces.
Regardless if you need chains or tracks, the Nokian Forest
rider performs great. With tracks they even perform better than traditional
diagonal forestry tires. They can
ensure that you can get up those challenging hills regardless if there is rain,
mud or snow.
These forestry tires have some of the best puncture
resistant due to its patented side-puncture protection and its steel
reinforcement, makes them have enough steel to meet any challenge in the
For long trouble free service life, here you have an
extremely durable tire that can help keep your operation up and running and
improve productivity while also saving cost for your overall operations. This
will also keep the workers more comfortable and satisfied.
The main objective of tire maintenance is to avoid letting small tire related problems to cause bigger problems, accidents, damages or injuries. When it comes to the tires for heavy equipment, the tires are very big, the tire pressure is very high and the loads that are being carried are very heavy. In addition when problems happen they are not necessarily easy to fix or attend to. The problems can occur deep in the forest or deep down in a mine. These places can be hard to reach, costly to repair and the downtime can be long, resulting in delays and costly repairs.
These facts puts more pressure on having an effective proactive tire maintenance program in place to strive towards reducing any unscheduled downtime and avoiding serious problems such as personnel injuries and costly accidents. The frequency of the preventive maintenance should be assessed based on historical data taking into account the equipment used, the specific tires used and any irregularities. For mining tires working deep down in a mine, working in extremely rough conditions, the maintenance will of course differ than for backhoe tires doing road maintenance and the cost implications might differ. The same goes for forestry tires, where getting stuck deep in the forest will have some potentially significant cost impacts.
Not only the frequency and the quality of the maintenance is
of important, the quality of the tires and that the tire selection process is
done correctly becomes almost as important if not even more important. The
procurement department has to work share the information to ensure that they
both work together at achieving the best overall cost effective solution that
increases productivity and reduces all related costs including both the
scheduled and unscheduled maintenance costs.
Hopefully by procuring the right tire, that are optimized
for the work that is being performed and are made for the loads and conditions,
then you will have less maintenance and fewer problems, resulting in better
work morale combined with fewer personnel injuries. Delays and waiting around
for things to get fixed is never good for the workers and it is costly and
often causes delays to the overall project. So if you notice too many
unscheduled downtime, then check both your tire selection and your maintenance
Forestry works provide some really tough conditions for the machines that are aimed to operate in there. If you have even been looking for mushrooms or berries in the forest you know that it can be very challenging to just walk through the forest. It is almost impossible to imagine that you could drive through there. The combination of very uneven grounds combined with a slippery surface makes it almost impenetrable.
This is why the equipment that need to work in these
conditions have to be very durable and equipped with tires that can provide the
grip and stability to get the job done while driving in the forest. When it
comes to forestry tires, Nokian Tyres
provide some of the worlds best tires for these conditions. Their forestry tires
can provide the best foundation for getting the job done, regardless of working
or weather conditions. They have to get you through swamps, slippery rocks,
steep hills, bushes, felled trees, sharp branches and rocks. Conditions that is
not very friendly for the tires. Then you can add bad weather that will include
even snow and ice.
When it comes to felling trees and getting them out of the
forest, requires that the equipment can get to any place within the forest and
that they will have enough stability to perform their work duties. Then they
have to be able to get the logs out of the forest to load it on a truck for
further transportation by road to either a saw or paper mill.
Depending on the process used you will use a combination of
forwarder and harvester to fell the trees and getting them out of the forest or
then you have a feller buncher and a skidder. The tires needed on these
machines will have some different requirements, but they all need extremely
durable tires. Harvester tires and forwarder tires are the most common
ones in cut to length forestry, where the tree is felled and cut to required
length all by the harvester and is then transported to the landing by the
The other method is then by having the feller buncher to
fell the tree, which is then dragged to the landing by a skidder. Where the skidder
tires have to able to provide sufficient grip to drag a whole tree through the
forest to the landing.
Depending on what work you need to have done and if you have winter conditions where the work is performed, you might need tires that can manage in these conditions. The work can usually not wait just cause it is bad weather. In some cases you might actually be contracted to remove snow, so then it is of course crucial that the tires can handle winter conditions, as people depend on you getting your job done with clearing the snow. Snow removal is very important to make sure that the country runs smoothly despite some heavy snowfall. Public transports, railways, airports and main roads have to be accessible
There are also other equipment that needs to work regardless
of weather, forestry, earthmoving and road maintenance and agriculture. So the
need for forestry tires, earthmoving and
road maintenance tires and agriculture tires. The work doesn’t
stop just because of some snow or bad weather, this is why you need to make
sure that the tires that you choose are up for the task and don’t let you down.
When it comes to snow clearing, using a wheel loader to do
the work, you can change the bucket to a snowplow attachment. You will need
wheel loader tires that are relentless in the work they can perform under heavy
conditions such as snow and ice. Wheel
loaders are know for performing heavy snow clearing work at big airports as
long as you have proper winter loader tires that are up for
the hard challenging work.
Also tractors used within farming applications can be used
for snow clearing missions during the winter as extra contracting when the
farming work is at a minimum. Contracting work has become an important form of
extra income for farming to make sure that the machine utilization is high to
gain higher return on invested capital. So you need tires that are versatile
enough that can handle the whole spectrum of the work and can handle any
weather. The tires need to work just as well on the field, on the roads while
driving between contracting work and then be able to perform snow clearing work
during the winter without letting you down, as snow clearing work pays well,
but needs to be swift and done without problems.
Nokian Tyres is the global market leader within forestry tires and has long traditions of working both with its customers and the equipment manufacturers to develop tires that meets the customers needs for them to overcome their challenges.
A very comprehensive technical tire manual, where you can find all the tire models and the best tires for the different equipment. Here you can find which tire pressure you will need and what is the intended loads.
regardless if you are looking for skidder tires or harvester tires, Nokian Tyres
will have the best tires on the market to ensure that your forestry business
will be a profitable and efficient operation, with minimum downtime or other tire
related problems that can slow down your operations and add extra unnecessary
costs. Proper tire selection using the technical tire manual is very important
In the markets where full tree logging still dominates, you will need to make sure that you equip your skidder with high quality skidder tires and why not choose tires from the global market leader in forestry tires, Nokian Tyres. Nokian Tyres have 2 tires that are suitable for skidders, they have the Nokian Logger King LS-2 and the Nokian Forest King TRS LS-2. They are both made for the biggest machinery operating in the hardest conditions.
Logger King LS-2 is designed for long, trouble free service life in heavy
skidder use. The tire is built to and offers excellent puncture resistance due
to steel breakers. The tread has self-cleaning properties to allow for
excellent grip even in wet and muddy conditions. This tire can be used with or
without over the tire tracks, which can easily be assembled if needed. The
special rubber compound is specially designed for the harsh conditions in the
forest with stubs and rocks that can damage the tires.The
Nokian Forest King LS-2 offers a steel fortified tire with durable rubber
compound specially designed for skidders. This tire is also for the high loads
and the tire is very cut and crack resistant. It also offers excellent grip due
to the straight tread.
Tyres also has a range of tires for forest tractors and logger
It is advisable to consult the technical tire manual to assure that you select
the correct tire for the challenges that you face. The manual allows you to
select the correct dimension and ensures that it can handle the load at the
various tire pressures.
Nokian Tyres is a global market leader as it has been working closely with both
its customers as well as the equipment manufacturers to develop tires that can
overcome the challenges of its customers. It produces some of the most durable
tires for the most challenging conditions. This is what you need to avoid
problems when you operating on distant sites. You do however need to make sure
that you follow the tire guidelines and proper maintenance to avoid unscheduled
downtime due to tire related problems. These tires are built to last, so
hopefully by choosing the best tires on the market you can avoid problems and
associated downtime and enjoy a high productivity forestry operations.
When selecting new tires for your forestry equipment, there is no reason not to choose a tire from Nokian Tyres. Being the global leader in forestry tires, they know what it takes to get the job done. The forest conditions in Finland are harsh by nature. Being a country in Northern Europe, they have four distinct seasons, where the winters are quite harsh. The forests are vast and you have swaps, bogs and rocks throughout the forest. You will need the best equipment combined with the best set of tires, to ensure that you can get the job done.
The ability to
work with minimum downtime is essential, so you need tires that will be
extremely durable and will not be affected by the environment regardless of
weather conditions. You will need to have superior grip and minimum slippage so
that you can continue to work relentlessly. Nokian Tyres have tires for
forwarders, harvesters, skidders and forest tractors. There are even tires that
can be used with tracks for even better grip in certain circumstances. You also
have the tires for the logging trucks; these logger tires are made for the long haul with high
loads, with great grip both on and off road, so that you can maneuver though
some difficult parts before you reach the roads.
Low wear and low
rolling resistance, will make sure that you consume less fuel and you have a
tire that is reliable enough to get the job done. The logger trucks need to be
able to work even on winter roads. Nokian Tyres were the ones that invented the
winter tires for trucks back in the 1930s. Nobody can produce a better tire for
trucks that have to drive through winter conditions. Working closely with both
their customers and equipment manufacturers they can innovate and develop tires
that are solving the problems of their customers.
stability and durability are powerful words describing the tires that are
produced by the market leader in tires for forestry. If you want a tire that
will maximize the operating time and productivity, to ensure that safety is
also. So all the way from harvesting the trees to transporting them to the
landing and getting them to the final destination by truck, all the vehicles
can rely on the tires from Nokian Tyres.